WALL WATERPROOFING DAMP PROOFING BY ACRYLIC CHEMICALS
Acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating
composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion
polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates.
Areas of Application:
1)Excellent as a waterproof coating for internal and external wall waterproofing .
2)Ideal as a coating for waterproofing of chhajjas, canopies, etc.
3)As waterproof coating on internal sides of domestic water tanks.
4)Good for waterproofing of sloped roofs.
5)As a waterproof coating for terraces .
Method of Application:
1. If there is existing plaster remove the plaster upto the bricks level .
2. Then remove all the loose concrete from the brick joints by water jet and clean the surface with
wire brush .
3. In the SSD (pre-wetted) condition Take up the first coat application with a stiff nylon brush. Work well into the substrate, to ensure that all small undulations are completely filled with the coating.ACRY L I C cementitious waterproof coating.
4)6 to 8 hrs after completion of first coat, take up second coat application in a direction perpendicular to the first.
5)Complete the application and leave to air cure for 2 days.
6)AFTER this new plaster will be done .
FEATURES:
ELASTOMATRIC|LONGEVITY 25 YEARS|SCREED CONCRETE OR PLASTERING REQUIRED OVER IT|1.5MM THICKNESS |
PRODUCTS : SIKA 107 /SIKA109/DR FIXIT PIDIFINE 2K/DR FIXIT FASTFLEX
SITE VISIT CHARGES : 250 RS .
CALL : 7980764154
WATERPROOFING CONTRACTOR IN KOLKATA | INTERNAL & EXTERNAL WATERPROOFING
Acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating
composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion
polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates.
Areas of Application:
1)Excellent as a waterproof coating for internal and external wall waterproofing .
2)Ideal as a coating for waterproofing of chhajjas, canopies, etc.
3)As waterproof coating on internal sides of domestic water tanks.
4)Good for waterproofing of sloped roofs.
5)As a waterproof coating for terraces .
Method of Application:
1. If there is existing plaster remove the plaster upto the bricks level .
2. Then remove all the loose concrete from the brick joints by water jet and clean the surface with
wire brush .
3. In the SSD (pre-wetted) condition Take up the first coat application with a stiff nylon brush. Work well into the substrate, to ensure that all small undulations are completely filled with the coating.ACRY L I C cementitious waterproof coating.
4)6 to 8 hrs after completion of first coat, take up second coat application in a direction perpendicular to the first.
5)Complete the application and leave to air cure for 2 days.
6)AFTER this new plaster will be done .
FEATURES:
ELASTOMATRIC|LONGEVITY 25 YEARS|SCREED CONCRETE OR PLASTERING REQUIRED OVER IT|1.5MM THICKNESS |
PRODUCTS : SIKA 107 /SIKA109/DR FIXIT PIDIFINE 2K/DR FIXIT FASTFLEX
SITE VISIT CHARGES : 250 RS .
CALL : 7980764154
WATERPROOFING CONTRACTOR IN KOLKATA | INTERNAL & EXTERNAL WATERPROOFING
I think this is an informative post and it is very useful and knowledgeable. therefore, I would like to thank you for the efforts you have made in writing this article.
ReplyDeletewaterproofing contractor in Singapore
I read your post and got it quite informative. I couldn't find any knowledge on this matter prior to. I would like to thanks for sharing this article here. buildhealer
ReplyDelete