Acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating
composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion
polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates.
Areas of Application:
1)Excellent as a waterproof coating for bathrooms, kitchen sinks, balconies, etc.
2)Ideal as a coating for waterproofing of chhajjas, canopies, etc.
3)As waterproof coating on internal sides of domestic water tanks.
4)Good for waterproofing of sloped roofs.
5)As a waterproof coating for terraces .
Method of Application
1 SURFACE PREPARATION
A )The surface of application must be thoroughly prepared by mechanical means, to remove all loose particles,laitance, etc.
B) Oil and grease, if any, must be de-greased with suitable solvents. It then must be washed off with jet of water and brought to touch dry state. Any surface undulations, cracks and crevices must be duly filled or repaired with
C)cement sand mortar mixed with latex polymers such as Dr. Fixit Pidicrete URP / Dr. Fixit Pidicrete MPB.
MIXing
A)Shake the liquid component well to a homogenous milky colour.
B)Use heavy duty slow speed mechanical mixer fitted with a suitable paddle for mixing the two components of the
material.
}}In a mixing vessel, slowly add the powder component in to the liquid under continuous stirring. Continue to stir
thoroughly to achieve a lump free homogenous slurry.
3 APPLICATION
A)I t is important that any pipe inserts or sanitary fittings should have been fitted grouted with suitable products well before taking up the application.
B)To grout pipe inserts, use Dr. Fixit Pidicrete 5M, non-shrink, flow applied cementitious grout to gaps around the pipes. Water pipes however will be best grouted by filling with polymer modified mortar prepared with
Dr. Fixit Pidicrete URP / MPB.
C)The surface of application must be pre-wetted thoroughly with water & brought to a touch dry state. Take up the first coat application with a stiff nylon brush. Work well into the substrate, to ensure that all small undulations are completely filled with the coating.ACRY L I C cementitious waterproof coating.
D)6 to 8 hrs after completion of first coat, take up second coat application in a direction perpendicular to the first.
E)Complete the application and leave to air cure for 2 days. A moist hessian cloth can be kept over the coated
surface to protect it from the effect of direct sunlight, in case of small open balconies or terraces, in bathrooms
and internal areas. Leave the coating without water curing for 2 days at least.
ELASTOMATRIC|LONGEVITY 25 YEARS|SCREED CONCRETE OR PLASTERING REQUIRED OVER IT|1.5MM THICKNESS |
PRODUCTS : SIKA 107 /SIKA109/DR FIXIT PIDIFINE 2K/DR FIXIT FASTFLEX
SITE VISIT CHARGES : 250 RS .
CALL : 7980764154
WATERPROOFING CONTRACTORS IN KOLKATA | ROOF TERRECE WATER PROOFING
No comments:
Post a Comment